Tile Sizes & Types

Precise Descriptions of Tile Sizes and Types

View our Tile Photo Gallery

Ceramic tile offers the best picture reproduction for photographs and art due to its smooth white surface prior to printing. Ceramic is good for general use, e.g., backsplash and shower tile, as well as large wall areas for public facilities, hotel lobbies, and restaurants.

Tile Sizes: Exact Dimensions of Custom Printed Ceramic Tile
Ceramic Tile (with lug spacers for grout lines)
4 ¼” Dal Tile 0190 Dimensions: 4.255” x 4.255” Thickness = 5/16” (0.31”)
6” Dal Tile 0190 Dimensions: 6” x 6” Thickness = 5/16” (0.31”)
8″x8″  Dimensions: 7 15/16” x 7 15/16” Thickness = 5/16” (0.31”)
6″x8″ Dimensions: 5 7/8” x 7 7/8”
8″x10″ Dimensions: 7 7/8” x 9 7/8”
12″x12″ Daltile Rainier Dimensions: 11 7/8” x 11 7/8” Thickness = 5/16” (0.31”)

Glass and tumbled porcelain tile are suitable for all the above locations plus more demanding locations. Their low moisture absorbency qualify them for wet and immersion service, including freeze/thaw exposure. Due to natural coloration and texture in the tumbled porcelain, it is recommended for an old world rustic look.

Tumbled Porcelain tile sizes
4″ Tumbled Porcelain
Dimensions: 3.813” x 3.813” (3 13/16″) Thickness = 3/8” (0.375”)
6” Tumbled Porcelain
Dimensions: 5.813” x 5.813” (5 13/16″) Thickness = 3/8” (0.375”)

Glass Tile

Glass tile is imaged on the backside. It is the most durable and scratch resistant. Textured glass is slip resistant (suitable for flooring) and smooth glass has sharper image reproduction. Both are hard enough for table tops and counters. For detailed glass tile specifications – Graffiti Resistant Glass Tile

Textured Glass Tiles (Floors, Walls, & Counter tops) Tile Sizes
6″ non-tempered
Dimensions: 6” x 6” Thickness = 3/16” (0.1875”)
12″ available tempered and non-tempered
Dimensions: 12” x 12” Thickness = 3/16” (0.1875”)

Smooth Glass Tile (Walls, Counter tops, indoor pools, fountains)
6″ tempered
Dimensions: 6” x 6” Thickness = 3/16” (0.1875”)
8″ tempered
Dimensions: 8” x 8” Thickness = 3/16” (0.1875”)

Tumbled Marble

Tumbled marble (aka tumbled stone) is also a good choice for most locations. The edges should be sealed with a clear tile & grout sealer if used where immersion is possible. Tumbled Marble is not recommended for baths and showers unless a professional type installation with moisture barrier is done. This is due to its higher moisture absorbency (use porcelain or ceramic), yet is fine for occasional wet contact such as near sinks and stoves. Each tile has unique variations in texture and color. It is good for color reproduction, but not as accurate photographically as ceramic or glass.

Tumbled Stone (Tumbled Marble) Tile Sizes
4″ Dimensions: 3.94” x 3.94″ (3 15/16″) Thickness = 3/8” (0.375”)
6″ Dimensions: 5.875” x 5.875″ (5 15/16″) Thickness = 3/8” (0.375”)

Floor Tiles

Custom Tile’s Ceramic Floor Tiles were rigorously tested by an independent, accredited testing facility using a variety of standard industry tests. Results demonstrate that Custom Tile’s Floor Tiles meet or exceed industry standards, including recommendations by OSHA and UL. These tiles have superior chemical, wear, and slip resistance compared with standard flooring materials, and are well-suited for both commercial and residential indoor environments. For very high traffic and abrasion-prone areas such as entryways and shopping malls, recommend glass or porcelain floor tiles for higher wear resistance over the years.

Floor Tile Sizes

6″ Glass textured, non-tempered    Dimensions: 6” x 6” Thickness = 3/16” (0.1875”)
12″ Glass textured, available tempered and non-tempered   Dimensions: 12” x 12” Thickness = 3/16” (0.1875”)
8″ Ceramic Floor Tile (Daltile Rainier)  Dimensions: 7.875” x 7.875” Thickness = 5/16” (0.313”)
12″ Ceramic Floor Tile  (Daltile Rainier) Dimensions: 11.875” x 11.875” Thickness = 5/16” (0.313”)

Outdoor Tiles: Suitable for Walls, Floors, Swimming Pools – call 434-660-7170 to discuss your project or use our Request for Price Quotation